Pardus 2008 RC1 de Ethernet kartı sorunu

HP Pavilllion bilgisayarıma Pardus 2008 RC1 kurduktan sonra Ethetnet kartım çalışmamaya başladı. Aslında herşey normal görünüyordu ama DHCP den IP alamıyordu.

lspci çıktısı

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
01:00.0 SCSI storage controller: Adaptec ASC-39320A U320 (rev 10)
01:00.1 SCSI storage controller: Adaptec ASC-39320A U320 (rev 10)
01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
04:00.0 VGA compatible controller: nVidia Corporation Device 06e2 (rev a1)

Küçük bir araştırma sonucunda bulduğum çözüm :

sudo /sbin/modprobe 8139too
su -
echo 8139too >> /etc/modules.autoload.d/kernel-2.6

:)

2 Yanıt

  1. peki bu çözüm ne yapıyor ne ediyor??

  2. Uygulanınca ethernet kartı çalışmaya başlıyor…

Yorum Yapın